Curved steel that has to look right.
Rolling and draw bending of I-beams and H-beams, channel, angle, flat bar, round bar, HSS, pipe and tubing, for architectural, civil and industrial work across Canada and the United States.

Benpro rolls and draw bends structural steel at our Calgary facility: I-beams and H-beams, channel, angle, flat bar, round bar, HSS in square and rectangular profiles, pipe and tubing, in carbon steel, stainless steel, aluminium, brass and copper. Pieces are curved to a steel detailer's drawings for architectural, civil and industrial projects across Canada and the United States, and can be blasted and coated at the same facility before they ship.
If it is a structural section, we have rolled it.
Beams the easy way and the hard way, channel legs in or out, angle rolled either leg, flat bar the easy way or the hard way, square and rectangular HSS, round bar, round tube and structural pipe, in carbon steel, stainless steel, aluminium, brass and copper. Forty years of one-off geometry means the awkward requests are the normal ones.
Terminology matters on a quote. Tell us the piece size, the finished radius or the chord and rise, the arc length, the orientation (leg in or out, flanges in or out) and the tangent lengths you need at each end. If you have a detailer's drawing, send that instead and we will read it off.
Processes
Rolling and draw bending
Sections
I-beams, H-beams, channel, angle, flat bar, round bar, HSS, pipe and tubing
Radius
Large-radius rolling; project-specific
Geometry
Segments, full circles, compound curves, tangents to drawing
Finishing
Steel grit blasting and liquid epoxy coating in-house
Specification
PFI ES-24 · CSA Z245.17, to the engineer's or detailer's drawings

Architectural finish work.
We produce architectural finish work and will run a mockup bend for visual sign-off before committing a production run. It is worth doing whenever the radius, piece size or finish is still moving in design development. We coordinate directly with the steel detailer's shop drawings.
Common questions.
What sections can you roll?
I-beams and H-beams, channel, angle, flat bar, round bar, hollow structural sections in square and rectangular profiles, pipe and tubing. We roll carbon steel, stainless steel, aluminium, brass and copper.
Can you roll a beam the hard way?
Yes. Specify the orientation clearly on your enquiry (easy way, hard way, leg in or out, flanges in or out), because it changes both the tooling and the price.
Do you offer mockup bends?
Yes. On visible architectural work we will produce a mockup for sign-off before the production run, which is the cheapest way to settle a finish question.
Can you work from our detailer's drawings?
Yes, and we prefer it. Send the shop drawings and we will coordinate directly with your detailer on radius, tangent lengths and piece orientation.
Can curved pieces be blasted and coated before delivery?
Yes, both happen at our facility. Pieces can arrive on site blasted to a near-white finish and coated, ready for erection or a shop top-coat.
What information do you need to quote?
Piece size and grade, finished radius or chord and rise, arc length, orientation, tangent lengths, quantity and the finish you need. A drawing covers all of it.
Send the drawing.
Piece size, radius, orientation and quantity. We will respond within one business day.
Pipe & tubing
Beams & flat bar
Channel & angle
Hollow structural sections
Blasting & coating in-house
