Skip to main content
Blasting

One booth and two machines on a closed grit loop.

One custom-built manual blasting booth and two automated enclosed machines. Steel grit, blasted to the SSPC standards, with the grit recycled rather than discarded.

Operator in protective gear blasting pipe inside the Benpro manual blasting booth

Benpro operates one custom-built manual blasting booth and two automated enclosed blasting machines at our Calgary facility, and we blast to the SSPC standards. Grit runs on a closed-loop recycling system, and because blasting sits between the bending decks and the coating booth, surface preparation adds no shipping leg to a job.

One booth, two machines

Because not everything fits one machine.

The two automated enclosed machines handle production volume and give a consistent finish, including on S-bends, tight radii and transitions. The custom-built manual booth runs alongside them for work that does not suit an automated cycle.

Blasting indoors in a filtered, enclosed station instead of out in the yard keeps the work independent of the weather, stops dust from drifting, and is better for the environment. The steel grit is recovered and recycled in a closed loop instead of being used once and dumped.

Machines

1 manual booth, 2 automated enclosed

Media

Steel grit

Finish

SSPC SP6 and SP10

Grit handling

Closed-loop recycling

Environment

Enclosed, filtered indoor station

Next step

Straight into the coating booth, same facility

Standalone

Available

Blasting FAQ

Common questions.

What surface finish do you achieve?

SSPC SP6, a commercial blast, and SSPC SP10, a near-white finish. Ask us if you need something different.

What media do you use?

Steel grit, recovered and recycled through a closed-loop system rather than consumed and discarded.

Can you blast complex bend geometry?

Yes. The automated machines handle S-bends, tight radii and transitions without difficulty.

Do you blast parts you did not bend?

Yes, we can. Send us the details and we will tell you whether we are the right shop for it.

Blasting

Prepared properly, coated immediately.

We will respond within one business day.

1 manual booth, 2 automated machines
Steel grit, closed loop
SSPC SP6 and SP10
Enclosed filtered station