Skip to main content
Architectural: structural & facades

Curves people will stand under and look at.

Rolled and bent structural steel for commercial, institutional and landmark projects: HSS, beams, channel, angle, flat bar and large-radius pipe, with architectural finish work.

Arched steel roof trusses spanning a large building under construction, with a telehandler on site

Benpro rolls and bends structural steel and architectural metalwork for commercial, institutional and landmark projects across Canada and the United States: hollow structural sections, I-beams and H-beams, channel, angle, flat bar and large-radius pipe. We produce architectural finish work, offer mockup bends for visual sign-off, and coordinate directly with the steel detailer's shop drawings. Established 1986.

Written for project leaders

The finish is part of the deliverable.

If you are holding a tolerance on a feature arch, a curtain-wall mullion radius or a curved roof member that has to read clean from thirty feet away, you need a bender who treats surface quality as part of the job rather than as something the painter will sort out.

Distortion, flat spots and roller marking all show under architectural lighting. We produce architectural finish work, and we will run a mockup bend for sign-off before committing a production run, which is by far the cheapest way to settle a finish argument.

Sections

HSS square, rectangular and round · I-beams and H-beams · channel · angle · flat bar · pipe & tubing

Processes

Rolling · draw bending

Orientation

Easy way, hard way, leg in or out, flanges in or out

Finish

Architectural finish work

Mockups

Available for visual sign-off

Preparation

Blasting to SSPC SP6 and SP10 and liquid epoxy coating in-house

What we hear from design teams

Three recurring problems.

The radius is still moving

In design development the member size, the radius and the finish are all still in play. We would rather be in the conversation early and tell you what is cheap to bend and what is not, than receive a drawing that commits you to an expensive geometry for no architectural gain.

One-off geometry with no die

Landmark work rarely fits a standard die set. Forty years of one-off bending means the awkward request is the normal request here: segments, full circles, compound curves and tangents called off a detailer's drawing.

A supplier has let you down late

Late-stage substitution is a real part of this market. Send the drawings and we will tell you whether we can hit your date, and we will respond within one business day so you find out quickly either way.

Curved steel pipe bend installed as a terrain park feature at a ski resort
Forty years of it

Arches, trusses, monorails and stage sets.

Over four decades we have curved steel for shopping-centre arches, unique roof trusses, monorail structures and public infrastructure, and for artists, stage designers and film set builders, who tend to arrive with the most interesting geometry and the shortest schedules.

We have also made the smaller street-level things: bike racks, bus shelters and handrails. Some of our bends are in the terrain park at Lake Louise.

Architectural FAQ

Questions from structural engineers.

Can you produce architectural finish work?

Yes. Where the member is exposed in the finished building we treat surface quality as part of the deliverable, and we will produce a mockup bend for visual sign-off before the production run.

What is the largest radius you can roll on HSS?

Large-radius rolling is project-specific, because it depends on the section size, wall and the arc you need. Send the member and the geometry and we will confirm what is achievable and what it costs.

Can you work from our steel detailer's shop drawings?

Yes, and we prefer it. We coordinate directly with the detailer on radius, tangent lengths and member orientation.

Do you offer mockup bends?

Yes. On visible work a mockup is the cheapest way to settle a finish question before you commit a full run.

Can members be blasted and primed before they ship?

Yes. Blasting to SSPC SP6 and SP10 finishes and liquid epoxy application both happen at our facility, so members can arrive prepared for erection or a shop top-coat.

Can you ship to Vancouver, Toronto or Seattle?

Yes. We ship across Canada and the United States including Alaska, and can arrange logistics as part of the job.

What do you need to quote a curved member?

Member size and grade, finished radius or chord and rise, arc length, orientation, tangent lengths, quantity and the finish required. A detailer's drawing covers all of it.

Architectural

Send the drawings.

We will tell you what is easy to bend, what is expensive, and whether we can hit your date. Within one business day.

HSS · beams · channel
Angle · flat bar
Large-radius pipe
Architectural finish work
Mockup bends available