Skip to main content
Oil & Gas

Pipeline bends, documented to the code you're audited against.

Induction and cold bends for upstream, midstream and downstream projects: carbon steel, stainless steel and alloys up to 36" OD, including sour service.

20-inch large-radius induction bend resting on timbers in the Benpro yard

Benpro fabricates induction and cold pipe bends for oil and gas projects across Canada and the United States, including Alaska. Carbon steel, stainless steel and alloys up to 36" outside diameter on induction and 20" on cold, including sour-service grades. Code coverage: CSA Z245.16, CSA Z245.17, CSA Z662, ASME B16.49, ISO 15590-1 and PFI ES-24. Bending, heat treatment, blasting, coating and CNC machining all happen at our Calgary facility.

Written for project leaders

One purchase order instead of four.

If you are scoping bends for a tie-in, a replacement spool or a facility package on a schedule that has already slipped once, the last thing you need is to chase a bender, then a heat treatment shop, then a coater, then a machinist, each with their own queue and their own idea of when your steel matters.

We do all four at our facility on Glenmore Trail, on one purchase order, with one project contact and one documentation package. That is what we mean by the vendor you don't have to manage.

Induction

Up to 36" OD · 10 m radius · 180°

Cold

Up to 20" OD · typically 10D and above

Coated pipe

YJ · YJ2K · UBRA · FBE cold bent

Sour service

CSA hardness requirements

Geometry

S-bends, riser bends, compound and multi-plane

Post-bend

Heat treatment, blasting, epoxy coating, machined bevels

The pressure points

What goes wrong on bend packages.

Schedule compression on tie-ins

Replacement spools and tie-ins get ordered late by definition, and nobody plans an emergency. Rush and emergency replacement bends are routine work for us, and we will respond within one business day so you are not waiting before you can move.

Sour-service compliance and audit trail

Sour-service work needs the hardness results, the mechanical tests and the traceability to survive an owner's audit years later. We assemble bend reports, MTRs and lab results as the job runs, and a destructive testing lab sits next door.

The CSA Z245.16/.17 testing burden

Since August 2022 bends have sat in their own standards, with revised mechanical test, hardness and Charpy requirements. Our destructive testing lab is next door, so the testing stays on site.

Codes & materials

What we bend to for oil and gas.

Induction bends

CSA Z245.16 · ASME B16.49 · ISO 15590-1 · PFI ES-24

Cold bends

CSA Z245.17 · ISO 15590-4 · PFI ES-24

Pipeline systems

CSA Z662

Sour service

CSA Z245.16/.17 hardness limits

Coating

CSA Z245.30

Machined transitions

CSA Z662 counterbore

Quality and safety

ISO 9001 registered · COR certified

Materials run from standard carbon line pipe through alloys, low-temperature service grades and stainless steel. Sour-service grades are routine work for us.

If your specification invokes a client standard on top of the code, and most operators have one, send it with the enquiry. We would rather read it at quote stage than discover it at inspection.

From the deck

Recent oil and gas work.

36-inch induction bend lifted by overhead crane in the Benpro shop

Oil & Gas

36-inch 5D induction bends for a major Alberta pipeline

  • 914.4 mm (36") OD
  • 5D bend radius
  • Bent on our AWS induction machine
  • For a major pipeline being built in Alberta
Machined bevel on a 406.4 by 12.7 millimetre ASTM A106-B pipe end

Machining

45° bend with CNC-machined weld bevel

  • 406.4 mm OD × 12.7 mm WT
  • Carbon steel line pipe
  • 45° bend, 1219.2 mm centreline radius
  • Machined counterbore, serialised and job-tagged
20-inch long-radius cold bend formed to 39 degrees on the Benpro shop floor

Cold bending

39° long-radius cold bend in 20-inch pipe

  • 508.0 mm (20") OD × 15.88 mm WT
  • 22,860 mm bend radius
  • 39° bend angle, one long gradual change in direction
  • Grade 448
Inlet pigtails with three 5D bends in multiple planes on the Benpro shop floor

Structural

Multi-plane inlet pigtails for a steam methane reformer

  • 1¼" inlet pigtails
  • Three 5D bends per piece, in multiple planes
  • Built to the customer's requisition rather than a standard spec
  • Tight tolerance on length, ovality, angle and ID
Oil & gas FAQ

Questions from pipeline teams.

Do you bend for sour service?

Yes. Sour-service work is routine. Confirm the grade and category with your enquiry so we can confirm the process, the hardness requirements and the testing that go with it.

Are your bends produced to CSA Z245.16 and Z245.17?

Yes. Z245.16 covers induction bends and Z245.17 covers cold bends, the two standards that took over from Z245.11 in August 2022. We also work to CSA Z662, ASME B16.49 and ISO 15590 as your specification requires.

Can you ship to Alaska or the Pacific Northwest?

Yes. We ship across Canada and the United States including Alaska, and can arrange logistics as part of the job if you need it.

Do you handle low-temperature service material?

Yes. Low-temperature service grades such as A333 Grade 6 are regular work.

Can you bundle bending, coating and machining onto one PO?

Yes, and that is the point of the way we are set up. Bending, heat treatment, blasting, coating and CNC machining all happen at one facility, on one purchase order, with one documentation package.

Do you provide bend reports and MTRs for our QA package?

Yes. Bend reports, mill test reports, coating inspection reports and lab results are standard, assembled as the job runs and shipped with the steel.

What is the largest bend you can produce?

36" outside diameter on induction, to a 10 metre maximum radius and up to 180°. Cold bending goes to 20" OD with the maximum radius limited only by pipe length.

How fast can you turn an emergency replacement bend?

Rush and emergency replacement bends are routine. We will give you a realistic date with the quote and respond within one business day of your enquiry, and because every process is at one facility, that date does not depend on anyone else's queue.

Oil & gas

Send the line list.

Diameter, wall thickness, grade, radius, code and target date. We will respond within one business day.

CSA Z245.16 · Z245.17
CSA Z662 · Z245.30
ASME B16.49
ISO 15590-1 · PFI ES-24
ISO 9001 · COR