Heat treatment at our facility.
A stress-relieving furnace measuring 5.4 by 3 by 3.6 metres, temperature up to 680 °C, and one of the few services we actively take on for parts we did not bend.

Benpro operates a heat treatment oven for stress relieving at our Calgary facility, with internal dimensions of 5.4 m long by 3 m wide by 3.6 m high and a working temperature range up to 680 °C. We do not heat treat every bend. Where a job calls for it, heat treatment is generally used to reduce hardness and eliminate localised stress points. We carry out post-weld heat treatment as well as post-bend, and we take heat treatment on as a standalone service for components fabricated elsewhere. Because the furnace sits at the same facility as the benders, it adds no shipping leg to your schedule.
Not every bend needs it.
Forming a bend works the material: the outside of the curve stretches, the inside compresses, and on a hot-formed bend the heated band goes through a thermal cycle and a quench. Whether that leaves anything needing correction depends on the grade, the wall and the governing code. Where heat treatment is called for, it is generally to reduce hardness and eliminate localised stress points.
Whether your job requires it, and at what temperature and hold time, is set by the material and the governing code rather than by us. Tell us the grade and the specification and we will confirm the cycle.
Maximum temperature
680 °C
Furnace length
5.4 m
Furnace width
3.0 m
Furnace height
3.6 m
Maximum weight
35,000 lb
Materials
Carbon steel and stainless steel
Standalone service
Yes, a focus area for us
Records
Cycle records supplied with the job documentation
Common questions.
How big a component will the furnace take?
The chamber is 5.4 metres long, 3 metres wide and 3.6 metres high, with a maximum temperature of 680 °C and a maximum weight of 35,000 lb.
Will you heat treat parts you did not bend?
Yes. Heat treatment is one service we actively take on standalone. Send the component, the material grade and the cycle your specification calls for.
Is heat treatment always required after bending?
No. It depends on the material, the wall thickness and the governing code. Tell us the grade and the specification and we will tell you whether your job needs it.
What records do I get?
Cycle records, for post-bend and post-weld work alike, form part of the documentation package that ships with the work, alongside bend reports, mill test reports and any lab results.
Bent elsewhere? We will still treat it.
Send the grade, the geometry and the cycle. We will respond within one business day.
Max 680 °C
5.4 m × 3 m × 3.6 m
Max weight 35,000 lb
Carbon steel and stainless steel
Available standalone
