Ends that fit first time.
Machined weld bevels, standard transitions, counterbore transitions in compliance with CSA Z662 and Victaulic grooves, on a CNC boring mill.

Benpro machines weld bevels, standard transitions, counterbore transitions and Victaulic grooves on a CNC boring mill at our Calgary facility. Counterbore transitions are produced in compliance with CSA Z662. Machining happens at the same facility as bending, heat treatment, blasting and coating, so a bend can leave with its ends already prepared for the field weld.
Where two wall thicknesses meet.
When a heavier-walled bend meets a lighter-walled run, the bore has to be transitioned so the weld sees a consistent section and the flow sees no step.
Counterbore transitions machined to CSA Z662 solve it before the pipe leaves. We machine the transition directly on the finished bend, which saves the customer a separate transition piece and the weld that attaches it. Our machine also has no minimum tangent length requirement: some machines cannot cut closer than 1,200 mm to the bend, which forces a transition piece.
Part weight
Up to 10 tons, set by crane capacity
Counterbores
Up to 150 mm deep
Operations
Weld bevels, standard transitions, counterbore transitions, Victaulic grooves
Compliance
Counterbore transitions to CSA Z662
Materials
Carbon steel, stainless steel and alloys
Standalone
Available
Diameter
3 inches and up
Transition ratios
Standard 10:1 and 4:1

Serialised, job-tagged and recorded.
Machined components carry the job number and a serial through the shop, and the dimensional records go into the same documentation package as the bend report and the mill test report. When someone asks which bend this is and what was done to it, the answer is written on the steel.
Common questions.
What is the heaviest part you can machine?
10 tons, set by our crane capacity.
Do you machine counterbore transitions to CSA Z662?
Yes. Counterbore transitions are produced in compliance with CSA Z662, alongside machined bevels and standard transitions.
Can you machine the ends of a bend you produced?
Yes. We machine transitions directly on the ends of a bend, which saves making and welding on a separate transition piece.
Can you produce transition pieces?
Yes. We produce standalone transition pieces.
Will you machine components bent elsewhere?
Yes, we can. Send us the details and we will tell you whether we are the right shop for it.
Ends prepared before it ships.
We will respond within one business day.
CNC boring mill
Bevels & transitions
Counterbores & Victaulic grooves
Counterbore to CSA Z662
